Multi Mill

Multi Mill is wide used for high speed granulating, pulverizing, mixing, shredding & chopping of wet and dry products used in manufacture of pharmaceuticals, dyes industries, chemicals, ceramics and cosmetics and confectionaries industries etc.

Attritor

Excellent for continuous output for fine grinding, dispersing of paints, pigments, inks, dyes.

The capacity ranges from 25 litres to 2000 litres.

High Shear Emulsifier

The high speed rotation of rotor blades within workhead exerts powerful suction force drawing the liquid and solid materials upwards from bottom of the vessel into centre of workhead and due to centrifugal force they are subjected to milling between ends of rotor blades. The dispersing product is sucked first axially downwards and then radially outwards through the pinned ring stator. Between the stator and rotor pins the product is exposed to a high frequency shearing with a shear rate of up to 7000 per second. Due to the load in defined shear gaps, even agglomerates, which are difficult to disperse, are effectively disintegrated and micro-fine dispersed with highest solids concentration.

Application :-
Mixing , breaking down agglomerates, dissolving, dispersing, emulsifying and homogenizing viscous materials, such as primers, paints and printing inks, pigmented coating compounds, plastic pastes, ointments, creams photographic emulsions, adhesive and resin solutions, etc.

Micro Pulverizors

Micro Pulverizers is a high-speed hammer and screen mill, which accomplishes size reduction by mechanically impacting process material. This method of size reduction is characterized by relative high energy and short residence time, minimizing heat build up during the milling process.
 

Colloid Mill

The colloid mill is useful for milling , dispersing, homogenizing and breaking down of agglomerates in the manufacture of food pastes, emulsions, coatings, ointments, creams, pulps, grease etc etc. The main function of the colloid mill is to ensure a breakdown of agglomerates or in the case of emulsions to produce droplets of fine size around 1 micron . The material to be processed is fed by gravity to the hopper or pumped so as to pass between the rotor & stator elements where it is subjected to high shearing & hydraulic forces. Material is discharged through a hopper whereby it can be recirculated for a second pass. For materials having higher solid & fibre contents conical grooved discs are preferred. Cooling & heating jacket arrangements are provided as a standard feature on both these mills.

High Speed Disperser